<h2>KaVo MASTERmatic M45 L Troubleshooting: Speed, Heat, Spray, and Long-Bur Problems</h2>

&nbsp;

A common KaVo MASTERmatic M45 L &quot;problem&quot; is not a problem at all: it is a 1:4.2 instrument being compared with a 1:5. Once that is cleared up, the real faults are easier to spot.

&nbsp;

This guide covers both.

&nbsp;

Safety first: if the head runs warm despite good spray, or a bur wobbles, stop using the M45 L.

&nbsp;

<div class="fw fl mt10 mb15">
 <div class="w90p ml5p fl">
 <img class="blog_editor_image" alt="" height="543" src="https://s3.us-east-2.amazonaws.com/repair.dental/uploads/articles/Gloved-Hands-Inspect-Dental-Handpiece-(1).png" width="1014" />
 </div>
 
 <div class="fw fl">
 <div class="tc mt10 mb15 cgrey">
 
 Gloved Hands Inspect Dental Handpiece (1)
 on
 <a href="https://repair.dental/repairguru/"
 class="cgrey b no_underline" 
 target="_blank"
 rel="noopener noreferrer"
 >
 Repair Guru
 </a>
 
 </div>
 </div>
 
 </div>

<h2 style="text-align:justify">Is It Really Slow?</h2>

&nbsp;

KaVo lists the M45 L at 1:4.2 with a speed range up to 168,000 rpm, while the M25 L and M05 L Mini are 1:5 with up to 200,000 rpm. A slightly lower top speed on the M45 L is by design.

&nbsp;

<h2 style="text-align:justify">Fault Table</h2>

&nbsp;

<table align="center" cellspacing="0" style="border-collapse:collapse; width:900px">
	<thead>
		<tr>
			<td style="background-color:black; border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:175px">
			What You Notice
			</td>
			<td style="background-color:black; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:200px">
			Possible Cause
			</td>
			<td style="background-color:black; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:225px">
			Safe Check
			</td>
			<td style="background-color:black; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:180px">
			Stop When
			</td>
		</tr>
	</thead>
	<tbody>
		<tr>
			<td style="background-color:#f2f2f2; border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:none; vertical-align:top; width:175px">
			Feels slower than M25 L
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:200px">
			Different ratio (1:4.2)
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:225px">
			Confirm model; check motor setting
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:180px">
			Clearly below normal
			</td>
		</tr>
		<tr>
			<td style="background-color:#f2f2f2; border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:none; vertical-align:top; width:175px">
			Warm head
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:200px">
			Low spray or wear
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:225px">
			Check 3-port spray
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:180px">
			Warm with good spray
			</td>
		</tr>
		<tr>
			<td style="background-color:#f2f2f2; border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:none; vertical-align:top; width:175px">
			Uneven spray
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:200px">
			Clogged port or filter
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:225px">
			Clean port; change filter
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:180px">
			Still uneven
			</td>
		</tr>
		<tr>
			<td style="background-color:#f2f2f2; border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:none; vertical-align:top; width:175px">
			Long bur wobbles
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:200px">
			Chuck wear or bur
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:225px">
			Fresh correct FG bur
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:180px">
			Still wobbles
			</td>
		</tr>
		<tr>
			<td style="background-color:#f2f2f2; border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:none; vertical-align:top; width:175px">
			New noise
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:200px">
			Wear or residue
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:225px">
			Lubricate; another motor
			</td>
			<td style="background-color:white; border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:none; vertical-align:top; width:180px">
			Persists
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

<h2 style="text-align:justify">Heat in a CoolHead Instrument</h2>

&nbsp;

KaVo designed CoolHead and optimized spray for patient safety. If the head warms up, check all three spray ports first. If spray is good and heat continues, take it out of service.

&nbsp;

<h2 style="text-align:justify">Warm head, good spray?&nbsp;</h2>

&nbsp;

<h2 style="text-align:justify">Spray Not Even</h2>

&nbsp;

KaVo&#39;s care tips recommend dedicated nozzle needles and warn that a dirty filter reduces spray. Never use descaling agents.

&nbsp;

<h2 style="text-align:justify">Long Burs That Wobble</h2>

&nbsp;

KaVo lists FG 1.6 mm burs up to 25 mm long. Use a fresh, correct bur and seat it fully. If it still wobbles, stop

.

<h2 style="text-align:justify">New Noise</h2>

&nbsp;

Lubricate with KaVo Spray or the QUATTROcare PLUS and test on another motor. Persistent noise needs a technician.

&nbsp;

<h2 style="text-align:justify">Time to Stop</h2>

&nbsp;

<ul>
	<li>
	Heat with good spray
	</li>
	<li>
	A wobbling bur
	</li>
	<li>
	Noise that survives lubrication
	</li>
</ul>

&nbsp;

<h2 style="text-align:justify">M45 L Troubleshooting FAQs</h2>

&nbsp;

Why is my M45 L slower than my M25 L?

It is designed that way. KaVo lists the M45 L at 1:4.2 (up to 168,000 rpm) versus 1:5 for the M25 L.

&nbsp;

Why is my M45 L warm?

Check the 3-port spray first. If the spray is good, stop and have it evaluated.

&nbsp;

<h2 style="text-align:justify">Related Readings from RepairGuru :</h2>

&nbsp;

<ul>
	<li style="text-align: justify;"><a href="https://repair.dental/repairguru/lab-scanner/straumann-cares-scanner-software-updates">Straumann CARES Scanner Software Updates</a></li>
	<li style="text-align: justify;"><a href="https://repair.dental/repairguru/lab-scanner/analyzing-why-fast-lab-scanner-repair-matters-for-dental-labs">Analyzing Why Fast Lab Scanner Repair Matters for Dental Labs</a></li>
	<li style="text-align: justify;"><a href="https://repair.dental/repairguru/lab-scanner/recognizing-early-failure-symptoms-in-high-precision-lab-scanners">Recognizing Early Failure Symptoms in High-Precision Lab Scanners</a></li>
</ul>

 
&nbsp;

<a href="https://repair.dental/print-shipping-label/handpiece-repair">Start Your Repair</a>

&nbsp;

<hr />
For more insights on professional dental equipment repair, please visit&nbsp;<a href="https://repair.dental/">Repair.Dental</a> or follow us on&nbsp;<a href="https://www.facebook.com/repair.dental">Facebook</a> &amp;<a href="https://www.instagram.com/repair.dental/"> Instagram</a>.

KaVo M45 L speed seems low, head warm, spray uneven or long burs wobbling? Troubleshoot KaVo's 1:4.2 molar contra-angle step by step.

KaVo MASTERmatic M45 L Troubleshooting | Repair.Dental