<h2 style="text-align:justify">StarDental Titan EX Maintenance: The Correct Routine for a Lubricated Low-Speed System 
&nbsp;</h2>

<h2 style="text-align:justify">Titan EX needs a different maintenance routine from LubeFree Titan motors 
&nbsp;</h2>

&nbsp;

The Titan EX instruction manual specifically describes lubrication of the motor and its attachments. This is a major distinction from the LubeFree Titan 3 and Titan E motors. For the Titan EX, maintenance includes cleaning, lubrication, purging excess lubricant, correct attachment care and steam sterilisation.

 
Always follow the instructions for the exact component. For additional guidance, explore <a href="https://repair.dental/services/handpiece-repair">Repair.Dental&#39;s dental handpiece repair services</a> and the <a href="https://repair.dental/services/handpiece-repair/star-dental-handpiece-repair">Star Dental handpiece repair section</a>.

&nbsp;

<h2 style="text-align:justify">Step 1: Prepare the system before cleaning 
&nbsp;</h2>

The manufacturer instructs users to flush the motor with its attachments for 20 seconds, then remove the motor and attachments from the dental unit tubing. Remove the straight nose cone from the motor where applicable. The manual states that no further disassembly is required for the specified cleaning preparation.

<h2 style="text-align:justify"> 
Step 2: Clean the external surfaces 
&nbsp;</h2>

The Titan EX manual specifies manual cleaning using a small brush and isopropyl alcohol to remove debris from external surfaces. For the straight nose cone, the manual identifies the StarDental cleaning brush, part 203043. Follow its instructions carefully; do not rotate the brush while inserting or withdrawing it.

 
Washer-disinfectors are not recommended in the manual. 
 
For broader instrument-care information, see our <a href="https://repair.dental/repairguru/handpieces/maintaining-precision-troubleshooting-common-issues-with-dental-handpieces">dental handpiece maintenance guide</a>. 
&nbsp;

<h2 style="text-align:justify">Step 3: Lubricate the motor correctly 
&nbsp;</h2>

The manufacturer instructs users to: 
&nbsp;

<ol>
	<li>
	Remove the motor from the delivery tubing.
	</li>
	<li>
	Remove instruments and attachments.
	</li>
	<li>
	Locate the drive-air tube at the rear connector.
	</li>
	<li>
	Apply three drops of lubricant directly into that tube.
	</li>
	<li>
	Run the motor for at least 30 seconds to purge excess lubricant and debris.
	</li>
	<li>
	Wipe away external lubricant using a clean, dry cloth or gauze. 
	&nbsp;
	</li>
</ol>

The drive-air tube is the next-to-largest tube on a 4-hole motor and the largest tube on a 2-hole motor. 
&nbsp;

<h2 style="text-align:justify">Step 4: Do not forget the attachments 
&nbsp;</h2>

The Titan EX contra angle, latch angle and straight nose cone have separate lubrication instructions. For the contra angle and latch-angle transmission, the manual specifies DentaLube II, part 262539, applied to the designated gears and transmission surfaces. Follow the manual&#39;s specific drop locations and assembly procedure. Do not apply the motor&#39;s three-drop procedure indiscriminately to every attachment. 
&nbsp;

You can also explore <a href="https://repair.dental/repairguru/handpieces/mastering-star-handpiece-repair-quick-easy-solutions">StarDental repair guidance</a> for further information about common handpiece repair considerations.

<h2 style="text-align:justify"> 
Step 5: Steam sterilise using the specified cycle 
&nbsp;</h2>

The Titan EX manual specifies: 
&nbsp;

<table align="center" style="width:900px">
	<thead>
		<tr>
			<th scope="col" style="text-align:justify">
			Instrument condition
			</th>
			<th scope="col" style="text-align:justify">
			Steam sterilisation cycle
			</th>
		</tr>
	</thead>
	<tbody>
		<tr>
			<td style="text-align:justify">
			Wrapped
			</td>
			<td style="text-align:justify">
			135&deg;C for at least 20 minutes
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Wrapped
			</td>
			<td style="text-align:justify">
			121&deg;C for at least 50 minutes
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Unwrapped
			</td>
			<td style="text-align:justify">
			135&deg;C for at least 8 minutes
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Unwrapped
			</td>
			<td style="text-align:justify">
			121&deg;C for at least 30 minutes
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Maximum temperature
			</td>
			<td style="text-align:justify">
			135&deg;C
			</td>
		</tr>
	</tbody>
</table>

 
The manual also specifies a minimum 30-minute drying period and cooling to room temperature inside the pouch. Follow the steriliser manufacturer&#39;s validated instructions and the current instrument manual. Do not use dry heat, cold sterilisation, ultrasonic cleaning, immersion or chemical disinfectors.

<h2 style="text-align:justify"> 
For further questions about equipment care and service procedures, consult the <a href="https://repair.dental/faq">Repair.Dental FAQ page</a>.</h2>

<h2 style="text-align:justify"> 
Step 6: Inspect the seals and connection 
&nbsp;</h2>

The manual identifies rear seals and O-rings as wear items. 
&nbsp;

<table align="center" style="width:900px">
	<thead>
		<tr>
			<th scope="col" style="text-align:justify">
			Component
			</th>
			<th scope="col" style="text-align:justify">
			Part number
			</th>
		</tr>
	</thead>
	<tbody>
		<tr>
			<td style="text-align:justify">
			2-hole rear seal
			</td>
			<td style="text-align:justify">
			203103
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			4-hole rear seal
			</td>
			<td style="text-align:justify">
			263770
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Motor O-ring
			</td>
			<td style="text-align:justify">
			266110
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

Replace damaged or worn seals with the correct configuration-specific component.

 
If you need help identifying a compatible replacement or assessing a connection problem, <a href="https://repair.dental/contact">contact the Repair.Dental team</a> before ordering or sending the equipment.

&nbsp;

<h2 style="text-align:justify">When the maintenance routine is not enough</h2>

 
If the Titan EX continues to lose power, leak air or produce abnormal noise after the correct maintenance procedure, arrange professional inspection.

 
Request a Titan EX assessment: <a href="https://repair.dental/repairguru/handpieces/dental-handpiece-repair-services">Repair.Dental&#39;s handpiece repair service</a>. 
&nbsp;

<table align="center" style="width:900px">
	<thead>
		<tr>
			<th scope="col" style="text-align:justify">
			Consideration
			</th>
			<th scope="col" style="text-align:justify">
			Repair.Dental
			</th>
			<th scope="col" style="text-align:justify">
			Local independent provider
			</th>
		</tr>
	</thead>
	<tbody>
		<tr>
			<td style="text-align:justify">
			Diagnosis
			</td>
			<td style="text-align:justify">
			Free diagnosis and estimate
			</td>
			<td style="text-align:justify">
			Confirm charges
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Parts
			</td>
			<td style="text-align:justify">
			OEM or equivalent, where appropriate
			</td>
			<td style="text-align:justify">
			Confirm compatibility
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Warranty
			</td>
			<td style="text-align:justify">
			6-month repair warranty, subject to terms
			</td>
			<td style="text-align:justify">
			Request written terms
			</td>
		</tr>
		<tr>
			<td style="text-align:justify">
			Shipping
			</td>
			<td style="text-align:justify">
			Free two-way shipping in the USA and Canada, subject to arrangements
			</td>
			<td style="text-align:justify">
			Depends on provider
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

You can also <a href="https://repair.dental/reviews">read customer reviews</a> to learn about other customers&#39; experiences with Repair.Dental.

<h2 style="text-align:justify">&nbsp;</h2>

<div class="fw fl mt10 mb15">
 <div class="w90p ml5p fl">
 <img class="blog_editor_image" alt="" height="355" src="https://s3.us-east-2.amazonaws.com/repair.dental/uploads/articles/dental-professional-lubricating-and-preparing-a-stardental-titan-ex-low-speed-handpiece-for-sterilisation.jpg" width="650" />
 </div>
 
 <div class="fw fl">
 <div class="tc mt10 mb15 cgrey">
 
 dental professional lubricating and preparing a stardental titan ex low speed handpiece for sterilisation
 on
 <a href="https://repair.dental/repairguru/"
 class="cgrey b no_underline" 
 target="_blank"
 rel="noopener noreferrer"
 >
 Repair Guru
 </a>
 
 </div>
 </div>
 
 </div>

<h2 style="text-align:justify">&nbsp;</h2>

<h2 style="text-align:justify">Frequently asked questions 
&nbsp;</h2>

<h3 style="text-align:justify">Does the Titan EX motor require lubrication? 
&nbsp;</h3>

Yes. The Titan EX manual gives a specific motor lubrication procedure using three drops in the drive-air tube. 
&nbsp;

<h3 style="text-align:justify">Which lubricant is specified for the attachments? 
&nbsp;</h3>

The manual identifies DentaLube II, part 262539, for the specified contra-angle and latch-angle lubrication points. 
&nbsp;

<h3 style="text-align:justify">How often should the system be cleaned? 
&nbsp;</h3>

The manual requires cleaning and sterilisation before first use and after each patient. 
&nbsp;

<h3 style="text-align:justify">What is the maximum sterilisation temperature? 
&nbsp;</h3>

The manual specifies a maximum of 135&deg;C. 
&nbsp;

&nbsp;

Keep the Titan EX clean, correctly lubricated and properly sterilised. For professional servicing, <a href="https://repair.dental/contact">request a free diagnosis from Repair.Dental</a>. 
&nbsp;

Phone: 1-855-533-3399

Email: <a href="mailto:admin@repair.dental">admin@repair.dental</a> 
&nbsp;

<a href="https://repair.dental/contact">Request a free diagnosis</a>

&nbsp;

<hr />
For more insights on professional dental equipment repair, please visit&nbsp;<a href="https://repair.dental/">Repair.Dental</a> or follow us on&nbsp;<a href="https://www.facebook.com/repair.dental">Facebook</a> &amp;&nbsp;<a href="https://www.instagram.com/repair.dental/">Instagram</a>.

Follow the Titan EX maintenance instructions for motor lubrication, attachment care, manual cleaning and steam sterilisation.

StarDental Titan EX Maintenance: Cleaning, Lubrication and Sterilisation