The Titan system&#39;s LubeFree design removes one maintenance task most low-speed handpieces still require. It doesn&#39;t remove the rest. Sterilization discipline, air-pressure checks, and knowing your specific motor and angle configuration are what keep this modular system running the way DENTALEZ designed it to.

&nbsp;

<h2>Know Your Components Before You Start</h2>

The Titan system separates into motor, angle, and swivel&nbsp; and DENTALEZ documents each with its own part number and care requirements

&nbsp;

<table align="center" cellspacing="0" style="border-collapse:collapse; width:623px">
	<tbody>
		<tr>
			<td style="background-color:black; border-bottom:1px solid black; border-left:2px solid black; border-right:2px solid black; border-top:2px solid black; vertical-align:top; width:779px">
			&nbsp;THE MOTOR NEEDS NO LUBRICATION
			</td>
		</tr>
		<tr>
			<td style="background-color:white; border-bottom:2px solid black; border-left:2px solid black; border-right:2px solid black; border-top:none; vertical-align:top; width:779px">
			DENTALEZ&#39;s own Titan motor instructions state it directly: if your delivery unit has oil/mist lubrication, detach and drain it &nbsp;the Titan motor needs no lubrication. This is a documented instruction, not a general assumption about LubeFree design.
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

<h2>Before First Use and Between Patients</h2>

<ul>
	<li>Clean and sterilize the motor before first use and between every patient use &nbsp;DENTALEZ&#39;s instructions are explicit that this applies to the motor itself, not just the angle or attachment.</li>
	<li>Reprocess as soon as reasonably practical following use, rather than letting handpieces sit uncleaned between appointments.</li>
</ul>

&nbsp;

<h2>Sterilization: The Official DENTALEZ Protocol</h2>

DENTALEZ&#39;s Titan motor instructions are specific about method&nbsp; not every sterilization approach is appropriate for this system.

<ul>
	<li>Use steam sterilization exclusively. DENTALEZ&#39;s documentation calls for steam sterilization for complete sterility of the Titan motor.</li>
	<li>Washer-disinfectors are not recommended. This is stated directly in the official instructions &nbsp;don&#39;t run the motor through a washer-disinfector cycle.</li>
	<li>Dry using syringe air. Both before packaging and as part of routine care, DENTALEZ specifies syringe air for drying rather than air-drying passively.</li>
	<li>Use standard sterilization packaging. Bag sized large enough to contain the item without stressing the seals.</li>
</ul>

&nbsp;

<ul>
	<li><div class="fw fl mt10 mb15">
 <div class="w90p ml5p fl">
 <img class="blog_editor_image" alt="" height="543" src="https://s3.us-east-2.amazonaws.com/repair.dental/uploads/articles/dental_handpiece_macro_image_1.png" width="1013" />
 </div>
 
 <div class="fw fl">
 <div class="tc mt10 mb15 cgrey">
 
 dental handpiece macro image 1
 on
 <a href="https://repair.dental/repairguru/"
 class="cgrey b no_underline" 
 target="_blank"
 rel="noopener noreferrer"
 >
 Repair Guru
 </a>
 
 </div>
 </div>
 
 </div></li>
</ul>

&nbsp;

&nbsp;

<h2>Air Pressure: A Maintenance Check, Not Just a Repair Step</h2>

DENTALEZ&#39;s instructions call for checking drive-air pressure before installing the motor, not only when troubleshooting a problem:

<ul>
	<li>Use an air pressure gauge (4/6-line) between the swivel and tubing.</li>
	<li>Adjust air pressure at the delivery head until the gauge reads 40&ndash;45 psi while operating the motor in full forward position with the foot control depressed.</li>
	<li>Recheck periodically as part of routine maintenance, since drift in delivery-unit pressure is a documented cause of bearing damage over time &nbsp;not just a symptom to chase after something breaks.</li>
</ul>

&nbsp;

<h2>Weekly and Periodic Care</h2>

<table align="center" cellspacing="0" style="border-collapse:collapse; width:623px">
	<tbody>
		<tr>
			<td style="border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:47px">
			1
			</td>
			<td style="border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:733px">
			Inspect for corrosion and wear.

			DENTALEZ&#39;s instructions call for routinely checking the motor for corrosion and worn parts, and replacing it when warranted rather than continuing to run a visibly degraded motor.
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

<table align="center" cellspacing="0" style="border-collapse:collapse; width:623px">
	<tbody>
		<tr>
			<td style="border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:47px">
			2
			</td>
			<td style="border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:733px">
			Check the swivel connection.

			Confirm it seats fully and shows no visible cracking or wear, since this is what allows quick disconnection for sterilization without air leaks.
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

<table align="center" cellspacing="0" style="border-collapse:collapse; width:623px">
	<tbody>
		<tr>
			<td style="border-bottom:1px solid black; border-left:1px solid black; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:47px">
			3
			</td>
			<td style="border-bottom:1px solid black; border-left:none; border-right:1px solid black; border-top:1px solid black; vertical-align:top; width:733px">
			Log service history.

			DENTALEZ publishes a handpiece log book to track cleaning, sterilization, and service dates across your Star equipment.
			</td>
		</tr>
	</tbody>
</table>

&nbsp;

<h2>Storage Between Uses</h2>

<ul>
	<li>Store components dry and packaged after sterilization rather than left exposed on an open tray.</li>
	<li>Keep LubeFree and Lubricated angles clearly separated and labeled to avoid an accidental care-routine mix-up.</li>
</ul>

&nbsp;

<h2>Mistakes That Shorten System Life</h2>

<ul>
	<li>Running the motor through a washer-disinfector. Explicitly not recommended in DENTALEZ&#39;s own instructions.</li>
	<li>Leaving oil/mist lubrication connected. If your delivery unit has it, DENTALEZ instructs you to detach and drain it &nbsp;the Titan motor doesn&#39;t use it.</li>
	<li>Ignoring drive-air pressure until something stalls. DENTALEZ frames the 40&ndash;45 psi check as a routine step, not just a troubleshooting one.</li>
	<li>Mixing LubeFree and Lubricated angle care. These are documented as separate, non-interchangeable configurations.</li>
	<li>Skipping the corrosion check. Motors should be routinely inspected and replaced when worn &nbsp;not run until they fail outright.<a href="https://repair.dental/print-shipping-label/dental-furnace-repair">Print Your Free Shipping Label Today</a></li>
</ul>

&nbsp;

<h2>Extending the Life of Your Star Titan System</h2>

Because the Titan system is modular, consistent care on each piece&nbsp; motor, angle, and swivel&nbsp; matters more than treating it as a single unit. For the warning signs that show up when this routine slips, see our companion piece, the <a href="https://repair.dental/repairguru/handpieces/star-titan-low-speed-system-troubleshooting-guide">Star Titan Common Problems &amp; Troubleshooting Guide</a>, and our general <a href="https://repair.dental/services/handpiece-repair">dental handpiece repair and maintenance</a> service overview.

<h2>What Practices Are Saying</h2>

&ldquo;We didn&#39;t realize the washer-disinfector was technically off-limits for the motor until we actually read the manual. Small thing, glad we caught it early.&rdquo;&nbsp; &mdash; Sterilization Lead, Group Dental Practice

&ldquo;Adding the pressure check to our weekly routine instead of only checking when something felt off has made our motors last noticeably longer.&rdquo;&nbsp; &mdash; Practice Manager, Family Dental Clinic

&nbsp;

<h2>Frequently Asked Questions</h2>

Q&nbsp;&nbsp; Does the Titan motor need lubrication?

A&nbsp;&nbsp; No. DENTALEZ&#39;s own instructions state the motor needs no lubrication, and specifically direct you to detach and drain any oil/mist lubrication line from your delivery unit if present.

Q&nbsp;&nbsp; Can I sterilize the Titan motor in a washer-disinfector?

A&nbsp;&nbsp; No. DENTALEZ&#39;s instructions explicitly state washer-disinfectors are not recommended for this system&nbsp; use steam sterilization exclusively.

Q&nbsp;&nbsp; How often should I check drive-air pressure?

A&nbsp; &nbsp;DENTALEZ specifies checking pressure before installing the motor, and it&#39;s worth rechecking periodically as routine maintenance rather than only when troubleshooting a problem.

Q&nbsp;&nbsp; Are LubeFree and Lubricated angles cared for the same way?

A&nbsp;&nbsp; No. DENTALEZ documents them as separate part numbers and configurations&nbsp; keep them labeled and don&#39;t mix their&nbsp;care routines

<hr />
For more insights on professional dental equipment repair, please visit&nbsp;<a href="https://repair.dental/">Repair.Dental</a>&nbsp;or follow us on&nbsp;<a href="https://www.facebook.com/repair.dental">Facebook&nbsp;</a>&amp;&nbsp;<a href="https://www.instagram.com/repair.dental/">Instagram</a>.

Official DENTALEZ-verified care routine for the Star Titan low-speed motor and angle system  sterilization, pressure checks, and storage.

TITLE Star Titan Low-Speed System Maintenance Guide