Precision Engineered: imes-icore™ Machine Service & Support

Welcome to the industrial-grade service center for imes-icore hardware at Repair.Dental. Known for German engineering and "Open System" versatility, imes-icore machines are the heavy-duty engines of modern dental labs. Whether you are running a compact chairside unit or an industrial CORiTEC® powerhouse, our technicians provide the specialized calibration and mechanical overhaul required to keep your production line moving.

Some dental milling systems in the market may be OEM-based or rebranded under different dental brands, but our service expertise covers the underlying industrial milling platforms regardless of branding.

precision engineered imes icore machine on Repair Guru

Which imes-icore Machine Do You Have?

We fix and service all models, whether they are brand new or older versions that the manufacturer no longer supports.

Current Market & Active Models

Machine Model	Category	Market Entry	Technical Highlights
CORiTEC 150i PRO	Compact / Chairside	~2019	Active. Extremely rigid monoblock cast body. 5-axis simultaneous processing with wet/dry capability.
CORiTEC 250i / 350i	Performance Lab	~2016	Active. The industry workhorse. 5-axis system designed for the full range of materials (Zirconia to CoCr).
CORiTEC 350i Robot	Automated Lab	~2018	Active. Features a fully integrated robotic arm for automatic loading of up to 12 discs.
CORiTEC 650i / 750i	Industrial	~2015/20	Active. Built on a granite base for vibration-free milling. Designed for high-volume Titanium and Chrome Cobalt production.

Legacy & Secondary Market Systems

Machine Model	Category	Status	Service Coverage
CORiTEC 140i	Chairside	Legacy	Full support for spindle and coolant system repairs through our imes-icore milling machine repair pipeline.
CORiTEC 450i	High-End Lab	Legacy	Specialized axis recalibration and bearing replacement.
CORiTEC 550i	Industrial	Legacy	Heavy-duty motor repairs and motherboard diagnostics.

Common Problems We Solve

If your machine is acting up, it’s usually one of these common issues. We can fix them all:

"My burs keep breaking" – This usually means the motor (spindle) is slightly off-balance or needs cleaning.
"The fit isn't right" – Your machine likely needs a calibration. Just like a car needs an alignment, your mill needs to be "reset" to stay accurate.
"The machine won't turn on or has an error code" – This could be a computer (software) problem or a blown part inside.
"The water isn't flowing" – In wet-milling, the pumps and filters get clogged over time. We deep-clean the whole system.
"Loud noises or shaking" – This happens when parts get loose or the motor bearings are wearing out.

How We Fix These Problems

At Repair.Dental, we don’t believe in "quick fixes" that break again in a month. We use a high-tech, industrial approach to make sure your imes-icore machine comes back stronger and more accurate than the day you bought it.

1. How We Fix: "Breaking Burs"

The Deep Clean: We don't just wipe it down. We disassemble the clamping collet (the part that holds the bur) and remove the microscopic metal and Zirconia dust that builds up inside.
Precision Balancing: We use a digital Run-out Gauge to see if your motor is "wobbling." If it's off by even a hair, we realign the spindle to ensure it spins perfectly straight.
The Result: Your burs cut smoothly instead of "snapping," saving you hundreds of dollars in wasted tools.

2. How We Fix: "Bad Fit Issues"

The 5-Axis Master Reset: We use a specialized Electronic Touch Probe to find the exact "Zero Point" of your machine.
Kinematic Calibration: We don't just calibrate one side. We run a full 5-axis test to make sure the machine knows exactly where it is when it tilts and rotates.
The Result: Your crowns will drop onto the models with a perfect "click" fit, every single time.

3. How We Fix: "Power Loss & Error Codes"

Circuit Surgery: Instead of telling you to buy an expensive new computer board, our electronics experts find the specific blown capacitor or fuse on your motherboard and solder on a new one.
Software Handshake: We clear out "ghost" error codes in the software and update your drivers so the machine and the computer talk to each other without any lag.
The Result: A machine that wakes up and gets to work without frustrating "System Error" pop-ups.

4. How We Fix: "Low Water Flow"

The System Flush: We use a safe, medical-grade chemical flush to dissolve the "sludge" inside the internal pipes.
Pump & Filter Overhaul: We replace the old, tired water pumps with high-pressure industrial pumps and install fresh, clean filters.
The Result: Powerful, consistent cooling that keeps your burs sharp and your Zirconia from overheating.

5. How We Fix: "Loud Noises & Shaking"

Bearing Replacement: If your motor is screaming, it’s usually the bearings. We replace them with premium ceramic bearings that can handle high speeds without the heat or noise.
Bolt Tightening & Leveling: These machines are heavy! We check every industrial bolt and re-level the granite or steel base to stop the vibration.
The Result: A machine so quiet you’ll actually be able to hear yourself think in the lab again.

Why Choose Repair.Dental?

We speak your language: No confusing technical talk. We explain what’s wrong and how we’ll fix it.
Fast help when you need it: We know every hour your machine is down, you’re losing money. We prioritize getting your dental milling machine repair completed quickly to restore operation.
Real parts: we use high-quality OEM parts that are made specifically for your machine so it lasts longer.
Remote Help: Sometimes we can fix your machine over the internet by logging into your computer through our Repair Gurus network—saving you a service visit!

What Other Lab Owners Are Saying About Us

"We run our CORiTEC 350i twenty hours a day, six days a week. When the spindle finally hit its limit, the guys at repair.dental didn't just swap the motor; they recalibrated the entire 5-axis arm. Our margins are actually tighter now than they were when the machine was brand new."

— Jim V., High-Volume Lab Owner

"Most repair shops are scared of the 650i because of the granite base and the linear motors. The Repair Gurus knew exactly what they were doing. They tracked down a pneumatic leak that had been causing us 'weak tool grip' errors for months. Absolute lifesavers."

— Sarah M., Industrial Milling Center

"I bought a used CORiTEC 250i that was in rough shape. repair.dental helped me do a full 'brain transplant'—replacing the old control boards and updating the firmware. It’s now the most reliable machine in my clinic, and it cost me a fraction of a new unit."

— Dr. Leo K., Digital Dentist

Easy Questions & Answers (FAQ)

Q: How often should I service my machine?

A: We recommend a professional "check-up" once a year. This prevents small problems from becoming expensive breakdowns. For common system answers, you can check our faq section.

Q: Do I have to ship my machine to you?

A: For small machines, safe shipping support makes the process easy, and you can track repair steps online. For the big ones, we can often come to you or help you through a video call!

Q: Can you fix my machine if it’s very old?

A: Yes! We repair older machines running. Our technical division updates legacy hardware platforms at our milling machine resource hub. We have parts for models that others say are "obsolete."

Q: Is it worth fixing a machine that is 10 years old?

A: Usually, yes! imes-icore machines have very strong frames. Often, a simple "brain transplant" (new electronics) or a new motor can make an old machine run like new for a fraction of the cost of a new one.

Get Your Machine Back to Work!

Don't let a broken machine stress you out. Our friendly team is ready to help you today.

Reach out through our online channels or book directly via our contact desk.

For more insights on professional dental equipment repair, please visit Repair.Dental or follow us on Facebook & Instagram.