How Do You Clean an RVG Sensor?

Cleaning your RVG is a crucial part of the extent of the life span of your dental sensor. Dust particles on your sensor can cause micro-abrasion on the sensor surface resulting in poor image quality.

how do you clean a rvg sensor on Repair Guru

If the sensor is infected, it causes the transmission of infection from one patient to another. Disinfecting an RVG sensor (digital dental X-ray sensor) requires proper care and attention to ensure it remains in good working condition. Here are some general steps to follow:

1. Unplug the RVG sensor and disconnect it from the computer before cleaning. Cleaning an X-ray sensor when it's connected to the computer can result in electric shock that can be life-threatening. Before wiping it with an alcohol swab, double-check that the sensor is detached from the computer.

2. Use a disposable disinfectant wipe or a soft, lint-free cloth with a small amount of disinfectant solution to wipe the sensor's surface. Avoid using paper towels or abrasive materials that can scratch the sensor. A cleaning paper considered rough to clean the sensor can result in micro-abrasions.

3. Wipe the sensor gently in a circular motion, covering all surfaces. BE gentle, do not rub with too much pressure.

4. Allow the disinfectant to sit on the sensor's surface for the recommended duration specified by the manufacturer. The recommended disinfectant is 70% isopropyl alcohol.

5. After the recommended time has passed, wipe the sensor with a clean, dry cloth to remove any excess disinfectant solution. Wipe the sensor gently in a circular motion.

6. Store your RVG sensor in a clean, dry, and protected environment to prevent damage or contamination. The storage environment should be moisture free.

It's important to follow the manufacturer's instructions for cleaning and disinfecting the RVG sensor, as different sensors may require different care. Additionally, ensure that the disinfectant solution is compatible with the RVG sensor's material and does not cause damage or corrosion over time.

Please Visit Repair.Dental or Follow us on Facebook  &  Instagram.